批发进口 gleitmo SFL 9680 (Item No. 5650)
3-component, solvent-based solid film lubricant

Description
gleitmo SFL 9680 is an air-drying 3-component solid film lubricant based on a special binder and solvent.
gleitmo SFL 9680 forms a dry lubricating film, which is distinguished by its excellent lubricating effect and high degree of abrasion resistance.

Fields of application
gleitmo SFL 9680 is used primarily for the dry lubrication of rubber materials. gleitmo SFL 9680 leads to very low coefficients of friction thus facilitating the assembly of parts.

Method of application
Mixing ratio:
parts
[wt %] parts
[vol %]
gleitmo SFL 9680 K1 89 90
gleitmo SFL 9680 K2 9 8.3
gleitmo SFL 9680 K3 2 1.7

The mixture of gleitmo SFL 9680 (K1+K2+K3) is ready for use. According to the application requirements it might be suitable to dilute the mixture with an adequate thinner. The workability time of the mixture is approximately 5 hours.
gleitmo SFL 9680 can be applied by spraying or dipping. The parts should be degreased prior to coating. To improve its adhesion on rubber materials, a plasma pre-treatment may prove beneficial.
gleitmo SFL 9680 cures at ambient temperature and forms a lubrication-effective coating. To achieve an enhanced mechanical and chemical resistance of the coating, curing at 100 - 150 °C is required.
Note
Shelf life: 6 months in closed original containers at room temperature.
Features
transparent
temperature range for use: -70/+180 °C short term up to 250 °C
forms a dry, thin lubricant film with a very low coefficient of friction
good adhesion on rubber materials, e.g. NBR, EPDM, VMQ…
largely resistant to water, mineral oil and fuels
exceptional non-stick and separating character

Description
gleitmo 925 is a water-based solid film lubricant. Its active lubricating component is a synergistically acting combination of solid lubricants with a predominant portion of molybdenum disulphide.

Fields of application
Coating of screws or nuts in order to avoid fretting (stainless steel), to achieve definite assembly and disassembly.
gleitmo 925 is suitable for metal-forming applications with high deformation rates.
Dry lubrication of slide rails, joints and bolts.

Method of application
gleitmo 925 is applied via compressed air and airless spraying systems. Immersion is convenient for bulk small parts. Brush or roller is recommended only in case spraying or immersion is infeasible.
The sliding surfaces to be coated should be carefully degreased with a solvent and should be dry before applying. Shake the container thoroughly or stir its contents before.

Note
Stir well before use!
Protect from freezing.
Shelf life: 12 month in closed original container at room temperature

Features
temperature range: -180 / +250 °C
resistant to mineral oil and synthetic fluids
forms a dry, firmly adhering lubricating film
is resistant to high loads
produces a low, constant friction
prevents seizure of materials with a tendency towards cold welding
facilitates assembly
prevents stick-slip friction