品牌:西门子
1:1
起订:1台
供应:999台
发货:3天内
GR2系列燃油燃烧器控制器
品牌:Brahma(布拉玛)
产地:意大利
电子燃油燃烧器控制了专为油燃烧器的非永久性的操作。这一系列的自动点火控制器适用于:整体油燃烧器温暖的空气发生器,蒸汽锅炉,功率垫圈,窑.由于技术和结构特征,对各种模型可用于自动化炊具和油燃烧器运行国内家电工业应用。
技术参数:
主电压220/240V 50/60Hz
110/120V 50/60Hz
运行温度-20oC...+60oC
环境湿度*大90%(在40oC)
保护等级IP40
时间
预点火时间1.5/10/20/30/40s
安全时间5/10s
火焰失败后的反映时间<1s
功率18VA
端口额定电流
预热器端口6.0A
马达端口2.0A
点火变压器端口2.0A
电磁阀1端口0.5A
电磁阀2端口0.5A
报警端口1.0A
内部保险丝6.3A慢速
外部保险丝4A快速
重量230g
主电压 220/240V 50/60Hz
110/120V 50/60Hz
运行温度 -20oC...+60oC
环境湿度 *大90%(在40oC)
保护等级 IP40
时间
预点火时间 1.5/10/20/30/40s
安全时间 5/10s
火焰失败后的反映时间 <1s
功率 18VA
端口额定电流
预热器端口 6.0A
马达端口 2.0A
点火变压器端口 2.0A
电磁阀1端口 0.5A
电磁阀2端口 0.5A
报警端口 1.0A
内部保险丝 6.3A慢速
外部保险丝 4A快速
重量 230g
RE3系列火焰监测器
品牌:Brahma(布拉玛)
产地:意大利
产品介绍RE3火焰监测器可把由离子探针或者紫外线光电管测得的火焰信号(模拟量电流信号)转换为开关量信号。
可作为远程监控火焰使用。
配合UV紫外线探测管或者离子探针使用。
The RE3 control is suitable to verify the presence of flame on gas burners. In fact it can use either a UV phototube or an electrode to exploit the flame rectification effect (ionization).
The RE3 flame detector is mainly used for industrial applications and for the installation of semiautomatic ignition and control systems, when it is necessary to control simultaneously and sequentially several burners. The presence of LEDs to signalise the operation also permits the use of RE3 control simply as flame detector.
主要参数 主电源 220V - 50/60Hz 240V - 50/60Hz 110V - 50/60Hz 工作温度 0...60ºC 环境湿度 *大90%(在40ºC) 保护等级 IP40 运行功率 3VA 外部保险丝 50mAT *小离子电流 1uA 反映时间 <1s点击显示 收起