自动校准中心气动针状夹具 PT
• 4根(PT25)或者8根(PT28)直径2mm的针。
• 适合塑料、纺织或食品工业。
• 双动作。
• 瞬时调整针行程 (1)。
• 多个安装附件 (2)。
• PT25: 大通孔 (3)。
• PT28: 用于清洁和释放的排放口 (T)。
• PT28: 用于接触热表面的PTFE 垫 (4) 。
• PT28: 选装磁性传感器 (5)。
Self-centering pneumatic needle gripper series PT
• 4 needles (PT25) or 8 needles (PT28) with 2mm diameter.
• Suitable for p1astics, textile and food industry.
• Double acting.
• Needle simultaneous stroke adjustment (1).
• Several mounting accessories (2).
• PT25: Large through hole (3).
• PT28: Blow-off port (T) for cleaning and releasing.
• PT28: Pad in PTFE (4) for hot surface contact.
• PT28: Optional magnetic sensors (5).
来自传感器的信号使用继电器开关或微处理器(基于控制箱的类型)进行调理,以便根据操作要求提供一个或多个输出。甚至可以使用跳线或选择器配置单个输出,从而定义类型(PNP或NPN),以及常开(NO)或常闭(NC)操作模式。传感器盒由框架、夹具和端子板组成,使传感器和输出的安装和接线简单方便。此外,采用的可复位熔断器保护整个电子设备避免短路。所有接线盒都有LED警示灯,通过透明塑料容器可见,便于排除故障和查看输入/输出状态。接线盒配有PG9电缆密封套(具体取决于型号),可确保集成的电子电路板(SBxC、SB6B、SBF)的IP65防护等级,而非模块化结构(SBM)。这使得可以尽可能地限制尺寸,并且将盒子直接固定至通常构成夹持器框架的铝型材上。
带端子板的传感器盒
IP66聚苯i乙烯传感器盒。• 可定制的电缆进线和出线,配有标准电缆密封套。• 2个螺钉端子,可直接连接15个输入/输出 。• 随附铝挤压型材直接固定螺钉。• 每个连接线路的zui大开关电流达1A。
IP66 polystyrene sensor box.• Customizable cable input and output with standard cable gland
2 screw terminals with direct connection of 15 inputs/outputs. • Supplied complete with direct fxing screws for aluminum extruded profles.
Maximum switching current up to 1A for each connection line.
以上信息由专业从事真空吸具的吉玛泰克于2024/5/17 9:57:23发布
转载请注明来源:http://m.herostart.com/qynews/jmtkzdh-2754085418.html