吸盘/PTFE
VG.PAAT 扁式 PTFE 吸盘,16 - 20 - 30 - 40
• PTFE 吸盘
• 硅氧烷补偿器
• 不锈钢配件
• 适用于zui高 300°C 的高工作温度
• PTFE 不粘在聚合物或热纤维上
• 弹性悬挂允许轴向和角向运动
技术特征
材料 PTFE
颜色 白色
温度范围-20+300 °C
GIMATIC是一家为工业自动化提供气动、电动夹具(尤其是整套EOAT解决方案)的制造商,产品销量多年来在欧洲乃至全i球范围内都很领i先,在夹具制造业拥有世界i领i先水平的技术。Gimatic拥有五大系列、3000多种产品,
吸盘/聚氨酯
聚氨酯吸盘 VG.GX35P
• 适合不同高度的补偿
• 适用于处理多孔和表面不平整的物品
• 具有非凡的弹性记忆功能
• 可提供 50 肖氏硬度,绿色
• 可提供 30/60 肖氏硬度。同时双色吸盘既坚固又灵活
GIMATIC是一家为工业自动化提供气动、电动夹具(尤其是整套EOAT解决方案)的制造商,产品销量多年来在欧洲乃至全i球范围内都很领i先,在夹具制造业拥有世界i领i先水平的技术。Gimatic拥有五大系列、3000多种产品,
双钳口自动校准中心的斜口气动夹具,DD系列• 传感器位于后部位置以及抓持区域占用空间更小的新理念。
• 可选磁性传感器 (1)。
• 只有在抓持物品时,传感器才打开。
• 带有弹簧开口的单动式驱动器。
• 高抓持力。
• 配有几个安装附件 (2)。
• 钢质颚式钳。
• FDA-H1 食品级润滑脂。
• 防止进入微小异物 (3)。
• 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper, series DD
• New concept with retracted sensor and smaller dimensi0ns in
the grip area.
• Optional magnetic sensors (1).
• The sensor is ON only when something is gripped.
• Single acting with spring opening.
• Very high closing force.
• Several mounting accessories (2).
• Steel jaws.
• FDA-H1 food-grade grease.
• Protection against the entry of small foreign bodies (3).
• Heavy-duty end-strokes.
编程单个SB8F
在对传感器盒进行编程之前,请确保有线输入处于所需配置(开/关)以启用输出。按下AUTOSET按钮并按住3秒钟,直到READING红灯开始闪烁,然后松开。红灯(READING)闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭,启用了输出。黄灯(STORED)指示启用输出。
Before programming the sensor box, make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for 3 seconds until the READING red light starts fashing, then release it.The red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).
以上信息由专业从事平行抓持器的吉玛泰克于2024/5/21 13:11:32发布
转载请注明来源:http://m.herostart.com/qynews/jmtkzdh-2756575643.html
下一条:旧房家装品牌在线咨询「快装巴士」